GB/T 26052-2022 PDF English
Search result: GB/T 26052-2022_English: PDF (GB/T26052-2022)
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
GB/T 26052-2022 | English | 185 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Tubular welding rods of tungsten carbide
| Valid |
GB/T 26052-2010 | English | 279 |
Add to Cart
|
3 days
|
Tubular welding rods of tungsten carbide
| Obsolete |
BUY with any currencies (Euro, JPY, GBP, KRW etc.): GB/T 26052-2022 Related standards: GB/T 26052-2022
PDF Preview: GB/T 26052-2022
GB/T 26052-2022: PDF in English (GBT 26052-2022) GB/T 26052-2022
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 77.160
CCS H 72
Replacing GB/T 26052-2010
Tubular welding rods of tungsten carbide
ISSUED ON: JULY 11, 2022
IMPLEMENTED ON: FEBRUARY 01, 2023
Issued by: State Administration for Market Regulation;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative references ... 5
3 Terms and definitions ... 5
4 Product classification ... 5
5 Technical requirements ... 6
6 Test methods ... 7
7 Inspection rules ... 7
8 Marking, packaging, transportation, storage and accompanying documents ... 9
9 Order form content... 10
Foreword
This document was drafted in accordance with the rules given in GB/T 1.1-2020,
Directives for standardization - Part 1: Rules for the structure and drafting of
standardizing documents.
This document replaces GB/T 26052-2010 Tubular welding rods of tungsten carbide;
compared with GB/T 26052-2010, in addition to structural adjustments and editorial
changes, the main technical changes are as follows:
a) Change the scope of application (see Chapter 1; Chapter 1 of the 2010 edition);
b) Add the normative reference of GB/T 2967 (see Chapter 2, 5.2 and 6.1);
c) Add the types of hard particles of tubular welding rods (see Chapter 4);
d) Change the representation of designations (see Chapter 4; 3.1 of the 2010 edition);
e) Add the designation of HTYZ (see Chapter 4);
f) Delete “mechanical properties” (see 3.3 of the 2010 edition);
g) Change the representation of hard particle size and particle size composition (see
5.3; 3.1 of the 2010 edition);
h) Add the tubular welding rod with a diameter of “6.0” and a length of “400, 500,
700” (see 5.5);
i) Change the test method for the filling rate of welding rods (see 6.3; 4.3 of the 2010
edition);
j) Change the sampling quantity for chemical composition, physical properties and
structure, as well as hard particle size (see 7.3; 5.3 of the 2010 edition);
k) Change the packaging method (see 8.2; 6.2 of the 2010 edition).
Please note that some of the contents of this document may involve patents. The issuing
organization of this document is not responsible for identifying patents.
This document was proposed by the China Nonferrous Metals Industry Association.
This document shall be under the jurisdiction of National Technical Committee 243 on
Nonferrous Metals of Standardization Administration of China (SAC/TC 243).
Drafting organizations of this document: Zigong Great Wall Hardfacing Materials Co.,
Ltd., Luoyang Golden Egret Geotools Co., Ltd., Kingdream Public Limited Company,
China Nonferrous Metals Techno-Economic Research Institute, SHAREATE TOOLS
LTD.
Tubular welding rods of tungsten carbide
1 Scope
This document specifies the technical requirements, test methods, inspection rules,
marking, packaging, transportation, storage, accompanying documents and order form
for tubular welding rods of tungsten carbide.
This document applies to tubular welding rods of tungsten carbide (hereinafter referred
to as welding rods) for surface overlaying or brazing of steel parts.
2 Normative references
The following documents are normatively referenced in this document and are
indispensable for its application. For dated references, only the version corresponding
to that date is applicable to this document; for undated references, the latest version
(including all amendments) is applicable to this document.
GB/T 699, Quality carbon structural steels
GB/T 1480, Metallic powders - Determination of particle size by dry sieving
GB/T 2967, Cast tungsten carbide powder
YS/T 412, Cemented carbide pellets
3 Terms and definitions
No terms and definitions need to be defined in this document.
4 Product classification
Welding rods are divided into four designations according to the type of hard particles:
HTYZ, HTYQ4, HTYQ6, and HTYQ7, as shown in Table 1.
7.4.2 When the hard particle size test result is unqualified, double sampling shall be
taken in the batch of products for repeated inspection of the unqualified items. If any
item is still unqualified in the test result, the batch of products shall be judged
unqualified.
7.4.3 When the test result of filling rate of the welding rod is unqualified, double
sampling shall be taken from the batch of products for a repeated inspection of the
unqualified items. If any item is still unqualified in the test results, the batch of products
shall be judged unqualified.
7.4.4 If the inspection result of the welding rod size and allowable deviation is
unqualified, the welding rod shall be judged as unqualified.
7.4.5 If the inspection result of the welding rod appearance quality is unqualified, the
welding rod shall be judged as unqualified.
8 Marking, packaging, transportation, storage and
accompanying documents
8.1 Marking
The following markings (or labels) shall be placed on the product packaging:
a) name and address of the supplier;
b) product name and designation;
c) batch number;
d) net weight;
e) number of this document.
8.2 Packaging
The product shall be packed in anti-rust paper (or kraft paper), put into a double-layer
plastic bag or an aluminum-plastic bag, and vacuumized, and then put into a plastic box
or a cardboard box. The net weight of each box is generally 3 kg ~ 8 kg, or determined
by the supplier and the buyer.
8.3 Transportation
The product, during transportation, shall be protected from moisture. During the
handling process, it shall be lightly loaded and unloaded, and violent collision and
mechanical extrusion shall be prevented.
8.4 Storage
...... Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|