GB/T 7345-2008 English PDF (GB/T 7345-1994, GB 7345-1987)

GB/T 7345-2008_English: PDF (GB/T7345-2008)
Standard IDUSDBUY PDFLead-DaysStandard Title (Description)Status
GB/T 7345-2008890 Add to Cart Auto, < 3 mins General requirements for electrical machine for automatic control system Valid
GB/T 7345-1994RFQ ASK 6 days General requirements for electrical micro machine for automatic control system Obsolete
GB 7345-1987RFQ ASK 9 days General requirements for electrical micro machine for automatic control system Obsolete

BASIC DATA
Standard ID GB/T 7345-2008 (GB/T7345-2008)
Description (Translated English) General requirements for electrical machine for automatic control system
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard K24
Classification of International Standard 29.160.30
Word Count Estimation 45,415
Date of Issue 2008-06-30
Date of Implementation 2009-04-01
Older Standard (superseded by this standard) GB/T 7345-1994
Drafting Organization Xi'an Institute of Micro-motor
Administrative Organization National Standardization Technical Committee micromotor
Regulation (derived from) Announcement of Newly Approved National Standards No. 11 of 2008 (No. 124 overall)
Proposing organization China Electrical Equipment Industry Association
Issuing agency(ies) Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China; Standardization Administration of China
Summary This standard specifies the control of motor and combinations thereof (hereinafter referred to as the motor) the terms and definitions, classifications, basic technical requirements and test methods, inspection rules, ready for delivery and customer service requirements. This standard provides organizations with the following requirements of the motor basic technical requirements and test methods: a) needs to demonstrate electrical products to meet user requirements and applicable laws and regulations, the ability, b) an order or product acceptance, c) test basis, d) government or industry regulatory product quality. When the optional provisions of this standard does not apply because the motor Product features, you can delete them, but confirmed the deletion does not affect electrical products to meet user requirements and applicable laws and regulations, the ability or obligation.

BASIC DATA
Standard ID GB/T 7345-1994 (GB/T7345-1994)
Description (Translated English) General requirements for electrical micro machine for automatic control system
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard L33
Classification of International Standard 29.160
Word Count Estimation 30,362
Date of Issue 1994/1/21
Date of Implementation 1994/10/1
Older Standard (superseded by this standard) GB 7345-1987
Regulation (derived from) Announcement of Newly Approved National Standards No. 11 of 2008 (No. 124 overall)
Proposing organization National Micro - motor Standardization Technical Committee
Issuing agency(ies) State Bureau of Technical Supervision

BASIC DATA
Standard ID GB 7345-1987 (GB7345-1987)
Description (Translated English) General requirements for electrical micro machine for automatic control system
Sector / Industry National Standard
Classification of Chinese Standard K24
Word Count Estimation 38,357
Date of Issue 1987/3/2
Date of Implementation 1987/11/1


GB/T 7345-2008 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 29.160.30 K 24 Replacing GB/T 7345-1994 General requirements for electrical machine for automatic control system ISSUED ON: JUNE 30, 2008 IMPLEMENTED ON: APRIL 01, 2009 Issued by: General Administration of Quality Supervision, Inspection and Quarantine of PRC; National Standardization Administration. Table of Contents Foreword ... 3 1 Scope ... 4 2 Normative references ... 5 3 Terms and definitions ... 6 4 Categories ... 8 5 Technical requirements and test methods ... 9 6 Inspection rules ... 34 7 Preparation for delivery ... 39 8 User services ... 40 Appendix A (Normative) Standard test brackets and tooling ... 41 Appendix B (Informative) Methods of measuring impedance and brush contact resistance ... 49 Appendix C (Informative) Measurement method of rotary inertia ... 55 Appendix D (Informative) Measuring method of electromechanical time constant ... 62 General requirements for electrical machine for automatic control system 1 Scope This standard specifies the terms and definitions, classification, basic technical requirements and test methods, inspection rules, delivery preparation, user service requirements for control motors and their combinations (hereinafter referred to as motors). This standard provides basic technical requirements and test methods for motors for organizations which have the following needs: a) It is necessary to prove that the motor product has the ability to meet the requirements of users and applicable laws and regulations; b) Ordering or product acceptance; c) Inspection basis; d) Government or industry regulation of product quality. When the optional provisions in this standard are not applicable due to the characteristics of the motor product, they can be deleted. However, the deletion cannot affect the ability or responsibility to prove that the motor product meets the requirements of users and applicable laws and regulations. The test methods specified in this standard are commonly used; users of the standard are allowed to choose and use them. This standard specifies the basic requirements for motors. When there are special requirements, especially for electronic drives, the manufacturer shall formulate special technical conditions. This standard shall be used together with the general technical conditions or special technical conditions for motors. This standard is applicable to various control motors and their combinations; general- purpose motors can also be adopted by reference. GB/T 2423.25 Environmental testing - Part 2: Test methods - Test Z/AM: Combined cold / low air pressure tests (neq IEC 68-2-40:1976) GB/T 2423.26 Environmental testing - Part 2: Test methods - Test Z/BM: Combined dry heat / low air pressure tests (neq IEC 68-2-41:1976) GB/T 2828.1 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (idt ISO 2859-1:1999) GB/T 2900.26 Electrotechnical terminology - Electrical machine for automatic control system GB/T 6113.2 Methods of measurement of radio disturbance and immunity (eqv CISP R16-2:1996) GB/T 7346 Basic outline constructional type for control motors and feedback components GB/T 10069.1 Measurement of airborne noise emitted by rotating electrical machines and the noise limits - Part 1: Method for the measurement of airborne noise emitted by rotating electrical machine (GB/T 10069.1-2006, neq ISO 1680- 1:1986) GB/T 10405 Type designation for electrical machine automatic control system GB 17799.3 Electromagnetic compatibility (EMC) - Generic standards - Emission standard for residential, commercial and light-industrial environments (GB/T 17799.3-2001, idt CISPR/IEC 61000-6-3:1996) GB 17799.4 Electromagnetic compatibility (EMC) - Generic standards - Part 4: Emission for industrial environments (GB/T 17799.4-2001, idt IEC 61000-6-4:1997) GB 18211-2000 General requirements for safety of electrical micro-machines JB/T 8162-1999 General specification for packaging of small control motors and feedback components 3 Terms and definitions The terms and definitions as established in GB/T 2900.26, as well as the following terms and definitions, apply to this standard. 3.1 Electrical machine for automatic control system 5.3.2 Test methods 5.3.2.1 Lead wire Put the lead-out end of the motor's lead wire downward. Apply the force specified in 5.3.1.2 vertically downward on the terminal. When applying force, the conductor core and insulation layer shall be evenly stressed. The force shall be applied in all directions for 5 s ~ 10 s. For the cable outlet from the rear end of the motor along the motor axis, first make the motor shaft extend vertically upward; rotate the motor 90° to bring the shaft into a horizontal position; rotate the casing 360° clockwise and counterclockwise around the axis. For the outlet along the radial direction of the motor, first place the motor horizontally with the lead wire downward; rotate the motor vertically 90° to make the shaft extend vertically upward; rotate the casing around the axis of the outlet hole 360° clockwise and counterclockwise. After the test, it shall meet the requirements of 5.3.1.2. 5.3.2.2 Threaded terminals Fix the motor. Apply the pressure and tension specified in 5.3.1.3 along the axial direction of the threaded terminal. Then apply torque to the end of the threaded terminal circumferentially. The torque is gradually and evenly applied (without any impact); it is maintained for 5 s ~ 10 s after reaching the torque value specified in 5.3.1.3. After the test, it shall meet the requirements of 5.3.1.3. 5.3.2.3 Wiring lugs (terminal) Fix the motor. Apply a tensile force to its end along the axial direction of the lug (terminal). The tensile force shall be gradually and evenly applied (without any impact); it shall be maintained for 5 s ~ 10 s after reaching the tensile force value specified in 5.3.1.4. After the test, it shall meet the requirements of 5.3.1.4. 5.4 Appearance and installation dimensions 5.4.1 Technical requirements The manufacturer shall stipulate the appearance and installation dimensions of the motor. The appearance and installation dimensions shall comply with the general technical conditions or special technical conditions of the motor. Unless otherwise specified, the manufacturer shall deliver the appearance and installation dimensions drawings when delivering the motor. Note: Appearance and installation dimensions include dimensional tolerances. 5.4.2 Test methods Select the type of measuring tool and accuracy level, according to the shape and installation dimensions of the motor. Place the motor under normal temperature conditions and make measurements one by one, after it reaches a stable non-operating temperature. The results shall meet the requirements of 5.4.1. Note: Instant measurement at room temperature is allowed, as long as the measurement accuracy is not affected. 5.5 Radial clearance 5.5.1 Technical requirements The radial clearance of the motor shaft is related to the machining accuracy of the motor bearing chamber, the bearing radial clearance, the radial stress of the shaft extension. When required, the manufacturer shall specify the radial clearance size and radial force of the motor shaft. The radial clearance shall comply with the general technical conditions or special technical conditions of the motor. 5.5.2 Test methods Install the motor firmly and horizontally axially. Place the measuring head of a dial indicator on the shaft extension surface, as close to the bearing position as possible; apply the force specified in the general technical conditions or special technical conditions, on the shaft in the direction perpendicular to the axial direction. First in one direction and then in the opposite direction, observe the difference between the two readings of the dial indicator, which is the measured value of radial clearance; its size shall meet the requirements of 5.5.1. Note: The position of applying force shall be close to the position of the measuring head of the dial indicator. The line connecting the measuring point on the meter head and the force application point shall be parallel to the motor axis. 5.6 Axial clearance 5.6.1 Technical requirements The axial clearance of the motor is related to the axial dimensional matching accuracy of the motor, the elasticity of the axial washer, and the axial force. When required, the manufacturer shall specify the axial clearance and axial force of the motor shaft. The axial clearance shall comply with the general technical conditions or special technical conditions of the motor. 5.6.2 Test methods Install the motor firmly and horizontally axially. It can place the measuring head of a This requirement only applies to motors with stop mounting. The verticality of the installation mating end face is related to the machining accuracy of the motor installation stop mating end face and the assembly quality of the stator and rotor. When required, the manufacturer shall specify the verticality of the installation end face. The verticality of the installation mating end face shall comply with the general technical conditions or special technical conditions of the motor. 5.9.2 Test methods To fix the motor rotor, it can place the measuring head of a dial indicator on the stator installation mating end face. Rotate the motor stator. Measure the runout of three circles evenly on the end face. Take the maximum value, which is the verticality of the installation mating end face. Its size shall comply with the requirements of 5.9.1. 5.10 Friction torque 5.10.1 Technical requirements 5.10.1.1 Overview Friction torque is one of the parameters that measures the rotational flexibility of......


Similar standards: GB/T 7344-2015  GB/T 7346-2015  GB/T 8128-2022  
Similar PDFs (Auto-delivered in 9 seconds): GB/T 7345-2008  GB/T 39631-2020  JB/T 9542-2015  GB/T 12665-2017