GB/T 4974-2018_English: PDF (GB/T4974-2018)
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
GB/T 4974-2018 | English | 159 |
Add to Cart
|
3 days [Need to translate]
|
Air compressors, rock drilling machines and pneumatic tools -- Preferred pressures
| Valid |
GB/T 4974-2018
|
GB/T 4974-2005 | English | 239 |
Add to Cart
|
3 days [Need to translate]
|
Compressors, rock drilling machines and pneumatic tools -- Preferred pressures
| Obsolete |
GB/T 4974-2005
|
GB/T 4974-1989 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Compressors, rock drilling machines and pneumatic tools--Preferred pressures
| Obsolete |
GB/T 4974-1989
|
Standard ID | GB/T 4974-2018 (GB/T4974-2018) | Description (Translated English) | Air compressors, rock drilling machines and pneumatic tools -- Preferred pressures | Sector / Industry | National Standard (Recommended) | Classification of Chinese Standard | J72 | Classification of International Standard | 23.140 | Word Count Estimation | 8,843 | Date of Issue | 2018-05-14 | Date of Implementation | 2018-12-01 | Older Standard (superseded by this standard) | GB/T 4974-2005 | Drafting Organization | Hefei General Machinery Research Institute, Tianshui Rock Drilling Machinery Pneumatic Tools Research Institute, Hefei General Mechanical and Electrical Products Testing Institute Co., Ltd. | Administrative Organization | National Compressor Standardization Technical Committee (SAC/TC 145) | Regulation (derived from) | National Standards Announcement No. 6 of 2018 | Proposing organization | China Machinery Industry Federation | Issuing agency(ies) | State Administration of Markets and China National Standardization Administration | Standard ID | GB/T 4974-2005 (GB/T4974-2005) | Description (Translated English) | Compressors, rock drilling machines and pneumatic tools. Preferred pressures | Sector / Industry | National Standard (Recommended) | Classification of Chinese Standard | J84 | Classification of International Standard | 23.140 | Word Count Estimation | 6,683 | Date of Issue | 2005-07-11 | Date of Implementation | 2006-01-01 | Older Standard (superseded by this standard) | GB/T 4974-1989 | Adopted Standard | ISO 5941-1979; MOD | Drafting Organization | Tianshui Institute pneumatic rock drilling tools | Administrative Organization | National Standardization Technical Committee pneumatic drilling machines and tools; National Standardization Technical Committee compressor | Regulation (derived from) | Announcement of Newly Approved National Standards No. 10 of 2005 (No. 84 overall) | Proposing organization | China Machinery Industry Federation | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People Republic of China, China National Standardization Administration Committee | Summary | This standard specifies: compressors, drilling machines and pneumatic tools performance data used to represent Priority pressure. This standard applies to: air compressors, drilling machines and pneumatic tools. The standard of the pressure gauge pressure. | Standard ID | GB/T 4974-1989 (GB/T4974-1989) | Description (Translated English) | Compressors, rock drilling machines and pneumatic tools--Preferred pressures | Sector / Industry | National Standard (Recommended) | Classification of Chinese Standard | J04;J84 | Word Count Estimation | 4,499 | Date of Issue | 1989/2/22 | Date of Implementation | 1989/9/1 | Older Standard (superseded by this standard) | GB 4974-1985 | Adopted Standard | ISO 5941-1979, MOD | Regulation (derived from) | Announcement of Newly Approved National Standards 2005 No. 10 (No. 84 overall) |
GB/T 4974-2018
(Air compressors, rock drilling machines and pneumatic tools)
ICS 23.140
J72
National Standards of People's Republic of China
Replace GB/T 4974-2005
Air compressor, rock drilling machine and
Pneumatic tool priority pressure
Aircompressors, rockdrilingmachinesandpneumatictools-
(ISO 5941.1979, Compressors, pneumatictoolsandmachines-
Preferredpressures, MOD)
Published on.2018-05-14
2018-12-01 implementation
State market supervision and administration
China National Standardization Administration issued
Content
Foreword III
1 range 1
2 Normative references 1
3 Terms and Definitions 1
4 Air compressor priority rated pressure 1
5 Priority design pressure for rock drilling machines and pneumatic tools 2
Appendix A (informative) The technical differences between this standard and ISO 5941.1979 and their causes 4
Reference 5
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 4974-2005 "Air compressor, rock drilling machinery and pneumatic tools priority pressure".
Compared with GB/T 4974-2005, the main technical changes in this standard are as follows.
--- English name Compressors changed to Aircompressors (see cover,.2005 edition cover);
--- Revised the terms and definitions of rated pressure (see 3.1,.2005 edition 3.1);
---Modify the nominal pressure term as design pressure and redefine it (see 3.2,.2005 edition 3.2);
--- Increased the pressure value of Table 1. the first column increased by 0.2, 0.8, (35), (45), the third column increased by 0.05, 0.063, 0.12
0.63, 3.45, 12.5, 18, 31.5, adjusted the position of some pressure values in the table (see Table 1, Table 1 of.2005);
--- Modify the second gear pressure in Table 2 to the fourth gear pressure, the pressure values of each gear are re-divided, and add 0.28, 0.8, 1.4, (see Table 2,.2005)
Table 2).
This standard uses the redrafting method to modify the use of ISO 5941.1979 "compressor, pneumatic tools and pneumatic machinery priority pressure."
There are technical differences between this standard and ISO 5941.1979, and the terms involved in these differences have been passed on the outer margins of the margins.
The vertical single line (│) is marked, and a list of the corresponding technical differences and their causes is given in Appendix A.
This standard also made the following editorial changes.
---Modified standard name;
--- Pressure unit replaces "bar" with "MPa".
This standard was proposed by the China Machinery Industry Federation.
This standard is under the jurisdiction of the National Compressor Standardization Technical Committee (SAC/TC145).
This standard was drafted. Hefei General Machinery Research Institute, Tianshui Rock Drilling Machinery Pneumatic Tools Research Institute, Hefei General Mechanical and Electrical Products Testing Institute
Limited.
The main drafters of this standard. Ren Fang, Wang Jianzu, Chen Fang, Zhu Yuhui, Gao Xuejing, Bao Yangyang.
The previous versions of the standards replaced by this standard are.
---GB/T 4974-1985, GB/T 4974-1989, GB/T 4974-2005.
Air compressor, rock drilling machine and
Pneumatic tool priority pressure
1 Scope
This standard specifies the priority pressure used to represent performance data for air compressors, rock drilling machines and pneumatic tools.
This standard applies to air compressors, rock drilling machines and pneumatic tools. This standard also applies to the components of the compressed air system.
Note. The pressures stated in this standard are gauge pressures.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 2346 Fluid Transmission System and Component Nominal Pressure Series (GB/T 2346-2003, ISO 2944.2000, MOD)
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Rated pressure ratedpressure
It shall be determined in the scope of 0.04MPa~45MPa for the design, manufacture and use of the unit specified in the standard, contract or nameplate.
The pressure level used for the pressure level.
Note. For air compressors, air compressors can be considered to have the best or near-optimal performance at rated pressure.
3.2
Design pressure designpressure
The pressure that the tool or machine is expected to use, usually the machine is tested for performance at this pressure.
Note 1. Suitable for rock drilling machines or pneumatic tools.
Note 2. Refer to GB/T 5621 for performance test.
4 Air compressor priority rated pressure
The preferred rated pressure of the air compressor is shown in Table 1. The first column in Table 1 is the nominal pressure value given in GB/T 2346; the second column is the air compressor
The preferred rated pressure; the third column is the pressure values commonly found in general sales documents, which are air compressors, air compressor units and their gas storage tanks.
Nominal pressure or maximum pressure.
Table 1 unit is MPa
Other rated pressures commonly used for nominal pressure priority rated pressure
0.04 0.04 0.05
0.063 0.063, 0.08
......
|